The dynamic push-through anchor for an economical serial installation at medium load level.

Dynamic-anchor FDA

The fischer dynamic-anchor FDA is processed with the injection mortar FIS HB. The anchor has general building regulations approval for dynamic applications in cracked concrete. Because of its cone shape is us suitable for fixing moderate load levels of dynamic loads indoors. The preinstalled threaded rod and the push-through installation allow rapid progress and predestine it for economical series installation. Platform lifts and conveyor systems, for example, are fixed with the Dynamic-Anchor FDA.

Produkt varijante

Download of image data

Produkt varijante

Atesti / izvješća testova

4 produkt varijanti

Drill diameter

Anchorage depth

Thread

Width across nut

Amount

GTIN (EAN-Code)

Legenda = Posjeduje atest— = Ne posjeduje atest

Pregledano 4 od 4 verzija

Advantages

Medium load level for a variety of applications.
Pre-assembled anchor rod for fast installation.
Assessed safety acc. to ETA.
Easy push-through installation leads to cost effectiveness – especially for serial installations.
Tight assortment with the size.
Less spacings and edge distances.
Drill holes are sealed.
The ETA for static and quasi-static loads allows the use also for the anchoring base steel fiber concrete.

Applications

Hydraulic ramps
Conveyor belts
Industrial robots
Cooperation robots and -parts
Guide rails for elevators

Building materials

Concrete C20/25 to C50/60, cracked and non-cracked
Steel fiber reinforced concrete

Primjenjuju se pojedinosti (građevinski materijali, opterećenja itd.) bilo kojeg dostupnog odobrenja. Dodatne dokumente možete pronaći u Download Center.

Atesti

ETA-20/0206
ETA-06/0171
DoP No. 0199
DoP No. 0353
(2103/12/12) - CM

Functionality

The injection system suitable for tensile zones consists of the fischer dynamic anchor rod FDA-A dyn and the injection mortar FIS HB.
FDA is approved for push-through installation.
Extruding the mortar causes the two components to be mixed and activated in the static mixer.
The mortar bonds the entire surface of the anchor rod with the drill hole wall and seals the drill hole.
The centring sleeve centres the anchor in the fixture, thus ensuring a safe load application.
During the setting process, the injection mortar FIS HB fills the annular gap in the fixture, and ensures optimum load distribution. This allows for the absorption of dynamic alternating loads.

Mounting Strip 1 Picture

1 / 10

ETA Certification Document

pdf, ETA-20/0206

European Technical Assessment for fischer Dynamic-Anchor FDA - Post-installed fasteners in concrete under fatigue cyclic loading

izdato 06/29/2020

DOP - Declaration of Performance

pdf, DoP No. 0199

Declaration of Performance for fischer dynamic anchor FDA (Bonded fastener for use in concrete)

izdato 03/16/2021

ETA Certification Document

pdf, ETA-06/0171

European Technical Assessment for fischer Highbond-Anchor FHB / FHB dyn / FDA - Bonded fasteners and bonded expansion fasteners for use in concrete

izdato 07/10/2024

DOP - Declaration of Performance

pdf, DoP No. 0353

Declaration of Performance for fischer Highbond-Anchor FHB / FHB dyn / FDA (Bonded expansion fastener for use in concrete)

izdato 02/23/2024

Sistemske komponente

ETA-approval
Drill diameter ( d₀ )	14 mm
Anchorage depth ( h_ef )	100 mm
Thread ( M )	M12
Width across nut	19 mm
Amount	10 pcs.
GTIN (EAN-Code)	4048962252941

ETA-approval
Drill diameter ( d₀ )	14 mm
Anchorage depth ( h_ef )	100 mm
Thread ( M )	M12
Width across nut	19 mm
Amount	10 pcs.
GTIN (EAN-Code)	4048962252965

ETA-approval
Drill diameter ( d₀ )	18 mm
Anchorage depth ( h_ef )	125 mm
Thread ( M )	M16
Width across nut	24 mm
Amount	10 pcs.
GTIN (EAN-Code)	4048962252972

ETA-approval
Drill diameter ( d₀ )	18 mm
Anchorage depth ( h_ef )	125 mm
Thread ( M )	M16
Width across nut	24 mm
Amount	10 pcs.
GTIN (EAN-Code)	4048962252989

Dynamic-anchor FDA

Produkt varijante

Prednosti / opis proizvoda

Upotreba i atesti

Uputstva za montažu

Dokumenti za preuzimanje