• Products
  • Service
  • Expertise
  • fischer group
Highbond anchor FHB II-A S
  • Product Picture: "fischer Highbond anchor FHB II-A S M12 x 75/25 gvz"
    • Product Picture
      Art.-No. 97268

      fischer Highbond anchor FHB II-A S M12 x 75/25 gvz

      Product variants
      Download of image data
      Top Features
      • Reduces anchorage depth, lowers expense when drilling and installing. This saves costs.
      • Through-type installations without additional aids. This saves time.
      • Optimised for low axial and edge distances in cracked concrete.
      • No drill hole cleaning is required when using a resin capsule. This saves time.
      • ETA approval for cracked concrete.

      The advantages / Product description

      The best performance in cracked concrete with the least installation effort
      Advantages
      • The reduced anchorage depth of the FHB II-A S minimises the drilling and installation effort. In addition using the combination with FHB II-P/-PF capsule no drill hole cleaning is required. Thus allowing for an especially economical and time-saving fixing.
      • With the anchor rod FHB II-A S, the drill bit diameter is the same as the thread diameter. This allows for push-through installation without any tools and reduces the amount of mortar required.
      • The cone shape of the anchor rod FHB II-A S is optimised for small axial and edge distances in cracked concrete, as well as thin concrete members. As a result, it is suitable for a wide range of applications.
      • The anchor rod FHB II-A S is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application.
      The fischer Highbond rod anchor FHB II-A S is produced from zinc-plated steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that railings, machines and heavy steel constructions are securely installed within internal areas.

      Application and approval

      Applications
      Suitable for:
      • Façades
      • Staircases
      • Steel brackets
      • Masts
      • Rash protection
      • Steelwork constructions
      • Timber constructions
      Ideal for:
      • Push-through installation
      Building materials
      Approved for:
      • Concrete C20/25 to C50/60, cracked and non-cracked
      Also suitable for:
      • Concrete C12/15
      You can find detailed information on building materials in the registration document.
      Approvals
      • ETA-05/0164
      • ETA-21/0948
      • DoP No. 0282
      • DoP No. 0293
      • DoP No. 0327
      • GS 3.2/16-352-1
      • (2103/12/12) - CM

      Assembly instruction

      Functionality
      • The FHB II-A S is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation.
      • With the FHB II-A S, the drill bit diameter is the same as the thread diameter, similar to with an anchor bolt.
      • The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole.
      • When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall.
      • When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art.-No. 62420.
      View assembly instructions as PDF
      Mounting Strip 1 Picture
      1 / 9
      • 1
        Mounting Strip 1 Picture
      • 2
        Mounting Strip 1 Picture
      • 3
        Mounting Strip 1 Picture
      • 4
        Mounting Strip 1 Picture
      • 5
        Mounting Strip 1 Picture
      • 6
        Mounting Strip 1 Picture
      • 7
        Mounting Strip 1 Picture
      • 8
        Mounting Strip 1 Picture
      • 9
        Mounting Strip 1 Picture
      Mounting Strip 2 Picture
      1 / 5
      • 1
        Mounting Strip 2 Picture
      • 2
        Mounting Strip 2 Picture
      • 3
        Mounting Strip 2 Picture
      • 4
        Mounting Strip 2 Picture
      • 5
        Mounting Strip 2 Picture

      Technical data

      ETA-approval
      Drill diameter (
      d0
      )      		12 mm
      Drill hole depth (
      h0
      )      		90 mm
      Anchorage depth (
      hef
      )      		75 mm
      Max. fixture thickness (
      t fix
      )      		25 mm
      Thread (
      M
      )      		M12
      Width across nut 19 mm
      Scale parts mortar 4
      Packaging Folding box
      Amount 10 pcs.
      GTIN (EAN-Code) 4006209972687

      Documents for download

      • ETAs and DoPs
      • Approvals and Certificates
      • Technical documents
      ETA Certification Document
      pdf, ETA-05/0164
      European Technical Assessment for fischer Highbond-Anchor FHB II - Torque controlled bonded anchor for use in concrete
      Created on 12/14/2017
      DOP - Declaration of Performance
      pdf, DoP No. 0282
      Declaration of Performance for fischer Highbond-Anchor FHB II (Bonded fastener for use in concrete)
      Created on 01/19/2021
      ETA Certification Document
      pdf, ETA-21/0948
      European Technical Assessment for fischer Highbond-Anchor FHB II for diamond drilling / extended working life
      Created on 09/09/2022
      DOP - Declaration of Performance
      pdf, DoP No. 0327
      Declaration of Performance for fischer Highbond-Anchor FHB II for diamond drilling / extended working life (Bonded expansion fastener for use in concrete)
      Created on 09/16/2022
      DOP - Declaration of Performance
      pdf, DoP No. 0293
      Declaration of Performance for fischer Highbond-Anchor FHB II (Bonded expansion fastener for use in concrete)
      Created on 01/03/2022
      cd-blue-c6785f99-77wnx